F&A FisFil | Light-Curing Pit & Fissure Sealent With Flouride Release

Description

 Description :

- Composite material for fissure sealing.

- F&A Fisfill is a photopolymer fluorine-containing composite material for sealing fissure sealing with improved thixotropy and a high degree of adhesion to etched enamel.

Indecation for use :

- Sealing of fissures and pits.

- Performing micro-restorations.

- Using as the first layer for large composite restorations in cavities with a C-factor equal to 5.

Benefits :

- Filling – special bioactive glass containing calcium- flour- phosphate;

- Prolonged output of ions of fluoride, calcium and phosphate which can re-mineralize tooth tissues and prevent caries.

- The average size of the bioactive filler particles is 0.4 microns.

- High fullness of material (about 50%).

- Excellent abrasion resistance and durability.

- Thixotropic.

- Radiopacity.

- Rheological additives facilitate the penetration of the material into the narrow fissures and pits.

- High adhesion to etched enamel.

- Perfect disguise (White).

- Control over fissure sealing for a long time (Clear).

Method of using :

- Thoroughly clean the surface for filling and treat it with etching gel containing orthophosphoric acid and antiseptic additives (F&A Phospo). Etching time - about 15 seconds (for milk teeth - 90-120 seconds). Then wash with plenty of water.

- The etched surface of the tooth should be white-blue and after drying NO saliva, moisture or any contaminants should be allowed onto this surface.

- Dry the etched surface thoroughly.

- Put one drop of F&A Fisfill on the mixing plate and using a brush apply a thin layer of it onto the etched surface.

- Light-cure it for 20-30 seconds using a Light Unit.

- Carefully close the syringe immediately after use.