OXFORD TRANS | Transparent A-Silicone As Matrix Material & For Bite Registration

Description

Description :

Transparent Automix A-Silicone with Fast Setting Time!

- Oxford Trans is the ideal product for a visual control of the occlusion during the bite registration. It is also excellent suitable as a transparent matrix material for light curing composites and for temporary crown and bridge materials.

- Oxford Trans is a transparent matrix material based on addition curing vinyl silicones. For this purpose make an impression of the surface before beginning the preparation. This impression builds a tailor made transparent matrix for the subsequent restoration (e.g.veneers) with light curing composites. 

- Oxford Trans is also suitable as a transparent bite registration material for fast and precise bite registration. Because of the transparency the occlusion can be visually controlled. 

- With the AUTOMIX cartridge Oxford Trans can be applied free of bubbles directly onto the teeth. 

Preparation of the AUTOMIX-Cartridge 

- First Scientific Dental Materials GmbH only recommends for Oxford Trans the use of mixing cannulas type Oxford Mix TIP(O) green. 

- Mount the cartridge into the application gun. Remove and dispose the closure-cap. For exact flow controlextrude slightly material until uniform flow from both orifices is achieved. Install the mixing cannula onto the cartridge and extrude needed material. 

Note: 

Store used cartridge with fixed used mixing cannula. Do not re-use the cartridge cap. Closing the cartridge by turning on the cap between use could cause cross contamination of components and thus premature setting. 

Storage 
- Do not store above 25 °C (77 °F)!

- Do not use after expiration date.