Endo 1 | Endo Activator

Description

Product introduction
The features of Endo 1 Ultrasonic Endo Activate Device
a) The work process of this machine adopts microcomputer automatic control, which is easy to operate and of high efficiency. Only one mode 
switching button, the machine can be started or turned off by pressing the mode switch button. 
b) This machine has two modes Sleep Mode and Irrigation Mode (work mode). 
c) This machine is of stable performance and adopts automatic frequency tracking system which can automatically searching for the best work state. 
d) The tips, Endo wrench and handpiece are removable and can be autoclaved under high temperature of 134°C and high pressure of 0.22Mpa. 
e) Root canal vibration amplitude is small, which will not hurt the root canal. 
Meanwhile, it is closer to the bottom of the root canal. Root canal vibration 
frequency is high, making Irrigation more efficient.
Basic technical parameters
1.  Dimensions : 246mm×25mm×25mm
2. Net weight : 99g 
3. Machine configuration list : See details in packing list
4. Classified by power supply : Powered by rechargeable batteries
5. Rechargeable lithium battery :
 Battery model : DLG14500
 Nominal voltage : 3.6V
 Capacity : 750mAh
6. Power adapter :
 Input : ~100V-240V 50Hz/60Hz 0.5-0.2A
 Output : DC 5V/1A
 Build-in fuse : T1A 250V
7. Working tip parameters :
 Output tip vibration frequency : 45kHz±4kHz
8. Environment parameters :
 Environment temperature : +5°C ~ +40°C
 Relative humidity at 30% -75%
 Atmospheric pressure : 70kPa ~ 106kPa
9. Device safety classification : 
 Classified by operation mode : Short time operating device
 Type of protection against electric shock: Class II equipment with internal 
power supply
 Degree of protection against electric shock : BF type applied part
 Degree of protection against harmful ingress of water : Ordinary 
equipment (IPX0)
 Degree of safety application in the presence of a flammable anesthetic mixture with air, oxygen, or nitrous oxide : Equipment cannot be used in 
the presence of a flammable anesthetic mixture with air, oxygen, or nitrous oxide
Cleaning
The cleaning should be performed no later than 24 hours after the operation. 
The cleaning can be divided into automated cleaning and manual cleaning. 
Automated cleaning is preferred if conditions permit.