iRoot Eco | Endomotor With Built-in Apex Locator

Description

Description :

• The eqipment is for indoor use only
• Auto start - Auto stop - Auto reverse 
• For both right and left hand users.
• Ambient  temperature 10-40C
• Relative Humidity - 10-70% (Non condensing)
• There are four working modes in this endomotor :

MODE 1 - Mode, apex locator control motor how to rotate.

MODE 2 - Mode, apex locator is working independently and endomotor is invalid.

MODE 3 - Mode, independent endomotor , apex locator is invalid

MODE 4 - Mode, apex locator and motor work seperately 

• The device offers 10 programs modes

Charging the Device:

• Ensure the device is switched off.
• Connect the battery charger to a power source (100-240 VAC).
• Connect the charger to the endomotor's charging port.
• Allow sufficient time for a full charge.

Powering On/Off:

• Press and hold the power button to turn on the device.
• To turn it off, press and hold the power button again.

Selecting Working Modes:

• Use the mode selection button to toggle between the four working modes.
• Modes include apex locator control, independent apex locator, independent endomotor, and separate operation of the apex locator and motor.

Setting Program Modes:

• Navigate through the program modes using the designated buttons.
• Select the desired program mode for specific endodontic procedures.

Mechanical Root Canal Preparation:

• Attach the contra-angle to the endomotor for mechanical root canal preparation.
• Adjust speed and torque settings as per the treatment requirements.

Apex Locator Function:

• Utilize the integrated apex locator for simultaneous root canal measurement during preparation.
• For independent measurements, use the separate file clamp provided.

Monitoring Battery Status:

• Keep an eye on the battery indicator to ensure sufficient power during procedures.
• Recharge the device when the battery is low.

Cleaning and Maintenance:

• Follow the manufacturer's guidelines for proper cleaning and sterilization procedures.
• Regularly inspect and clean the contra-angle and file clamp.