Description

RINGS:

 

№ 1.099

Rings
• standard ring № 1.099(5) - tines height - 5 mm
• low ring № 1.099(4) - tines height - 4 mm
• high ring № 1.099(6) - tines height - 6 mm


Tines of ring
№ 1.099
Scheme
on tooth

№ 1.099A

Ring

Ring № 1.099А has the same construction of tines as standard ring № 1.099 for sectional matrices. Addition of extra loop on the ring makes it more flexible and allows to operate in wider range of opening without increase of residual distance between tines after use.
Tines of ring
№ 1.099A
Scheme
on tooth

№ 1.099c

Ring
with silicone safety cover

autoclavable
Tines of ring
№ 1.099c
Scheme
on tooth

№ 1.199

Ring
Tines of ring
№ 1.199
Scheme
on tooth

№ 1.299

Delta Ring

Double tines of Delta ring are suitable for installation of fixing wedges and add-on wedges.
Tines of ring
№ 1.299
Scheme
on tooth

№ 1.299c

Delta Ring

Ledges (shoulders) on Delta ring № 1.299с prevent getting of tongue into operating area.
Tines of ring
№ 1.299c
Scheme
on tooth

№ 1.167

MD-Ring

Tines of MD-ring provide the most non-fluctuating placement with sufficient space for wedge.
Tines of ring
№ 1.167
Scheme
on tooth

№ 1.167c

MD-Ring

Ledges (shoulders) on MD-ring № 1.167с prevent getting of tongue into operating area.
Tines of ring
№ 1.167c
Scheme
on tooth

№ 1.166

D-Ring

Tines of D-ring are curved inwards to fix matrix on distal side of the tooth.
Tines of ring
№ 1.166
Scheme
on tooth

№ 1.177

M-Ring

Tines of M-ring are curved out to fix matrix on mesial side of the tooth.
Tines of ring
№ 1.177
Scheme
on tooth

№ 1.033

Ring
  Tines of ring
№ 1.033

№ 1.033А

Ring

Ring № 1.033А has the same construction of tines as standard ring № 1.033 for saddle matrices. Addition of extra loop on the ring makes it more flexible and allows to operate in wider range of opening without increase of residual distance between tines after use.
Tines of ring
№ 1.033А

№ 1.033c

Ring
with silicone safety cover

autoclavable
  Tines of ring
№ 1.033с

№ 1.022

Ring
  Tines of ring
№ 1.022

№ 1.044

Slot Ring
Tines of ring
№ 1.044
Scheme
on tooth
WARNING!!!
When operating with ring:
1) make sure of integrity of the ring and absence of rust on it;
2) avoid high-speed opening;
3) open the ring for width not more than 10 - 12 mm;
4) open the ring for necessary width outside the mouth before placing it on a tooth.

 

 

CLEANING AND STERILIZATION INSTRUCTIONS:


1) Submerge instruments in cleaning agent solution with neutral pH for 20 min;
2) Rinse the instruments thoroughly with purified water for 3-5 min;
3) Perform standard moist heat / steam sterilization procedure following the sterilizer instructions.
WARNING!!!
1) Do not use cleaning agents with high percentage of chlorine and cleaners containing oxalic acid;
2) Do not keep instruments in liquid medium for more than 3 hours.

 

Additional information

Order Number

1099(5), 1299

Packaging

 

 

Sectional-Contoured-Metal-Matrices-and-Accessories-TOR-VM.png

add.png

 

0 Review for “Rings And ADD-ON SILICONE WEDGES | Matrix Accessories”

5 Stars

0%

4 Stars

0%

3 Stars

0%

2 Stars

0%

1 Stars

0%


Be the first to review “Rings And ADD-ON SILICONE WEDGES | Matrix Accessories”

Please login to be able to rate this product! Login