RUBBER DAM Liquid | Light Cured Rubber Dam Liquid

Description

Description :

Light-cured RUBBER-DAM liquid is dedicated for:
Gingiva protection during dental treatments: whitening, etching, microabrasion, sandblasting etc.
Sealing rubberdam.

Content:
- Urethane Resins
- Inorganic Fillers

Method of Use For gingiva protection during dental treatments:

1 - Clean and dry gingiva.
2 - Remove the syringe lock and install the included disposable applicator.
3 - Apply RUBBER-DAM LIQUID along the application area 4-6 mm wide and approximately 1.5-2 mm thick, at the same time overseeing the amount of the preparation being applied
4 - If possible, squeeze RUBBER-DAM LIQUID through interdental space.
5 - Cure the preparation for 15 seconds using polymerization lamp
6 - Conduct the curing process evenly in a scanning motion
7 - Then, proceed the dental treatment
8 - After the treatment is completed, lift off polymerized RUBBER-DAM LIQUID using the instrument on the either side and remove.

Method of Use In order to seal rubber dam:

1 - Isolate the working area (tooth, teeth, alveolus) using RUBBER-DAM.
2 - In order to seal rubber dam, apply the layer of the liquid on the edge of the gingiva and the rubber dam
3 - Cure the preparation for 15 seconds using a polymerization lamp.
4 - Conduct the curing process evenly in a scanning motion
5- Then, proceed the dental treatment.
6 - After the treatment is completed, lift off polymerized RUBBER-DAM LIQUID using the instrument on either side and remove.