Description
Description :
Ultradent 90-second Porcelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain. Ultradent 60-second Silane is used after hydrofluoric acid etching to prepare the surface for bonding resin.
Studies have demonstrated that Silane, when used with Porcelain Etch and a quality bonding resin, yields the highest bond strength to porcelain when compared with other porcelain bonding products.1 Both Porcelain Etch and Silane may be used intraorally or extraorally.
- Porcelain Etch is a viscous, buffered 9% hydrofluoric acid
- Etch is easy to control and place
- Will not stain composite or resin cement
- Silane is a single-component solution
- Yields highest porcelain-to-resin bond strengths1
- Porcelain Etch and Silane may also be used on lithium disilicate (IPS e.max®2 ) restorations
- For Porcelain Etch, use with Inspiral Brush tips. For Silane, use with Black Mini Brush tips.
- Certified gluten free
Clinicals
-Porcelain Surface Before and After Porcelain Etch
porcelain surface following a 90-second etch with Ultradent Porcelain Etch.
-Preparing the Porcelain
1-Etch clean bonding surface with Porcelain Etch for 90 seconds, rinse, and dry.
2-CLINICAL TIP: Apply phosphoric acid (Ultra-Etch™ etchant) for five seconds to remove porcelain salts and debris formed by hydrofluoric acid etching. Rinse and air dry.
3-Apply a puddle coat of Silane to inside surface for 60 seconds, dry, and set prosthesis aside. Do not rinse
0 Review for “Ultradent™ Porcelain Etch And Silane”
5 Stars
0%
4 Stars
0%
3 Stars
0%
2 Stars
0%
1 Stars
0%