VioSeal | Resin Based Root Canal Sealing Material

Description

Indications :

- Permanent obturation of root canals in combination with obturation points
- Lubricant & sealing of GP point
- Adhesion agent between GP and root canal wall

Characteristic :

- Biocompatibility meets ISO 10993 series (Acute Systemic Toxicity, Oral Mucosa Irritation, Sensitization, Pyrogen) 

- Radiopacity : 8.0 mmAl

- Tight Sealing

- Easy to Mix Paste-Paste

- Solubility : 0.7% 

- Antibacterial Effect

 How to use :

Canal Preparation

1. Thoroughly prepare and irrigate the root canal using standard endodontic techniques.

2. Evacuate liquids from canals and dry with absorbent paper points.

3. Select and set aside a sterilized master guttapercha cone for each canal. 

Restoration

1. Remove the cap from VioSeal syringe and extrude a small amount to make sure both base and catalyst are dispensing equally.

2. Mix VioSeal on a mixing pad using an automatic mixing tip or extrude with an eco tip and manually mix with a spatula for 15-20 seconds until homogenous color and consistency is achieved.

3. Coat the preselected master guttapercha cone with a thin layer of VioSeal and very slowly insert it into the canal. Seat it to full working length and confirm tug back at the apex.

4. If desired, place addtional guttapercha points into the canal using standard condensation techniques.

5. Trim excess guttapercha using a hot instrument. Apply a slight amount of vertical condensation, and remove any excess sealer with a moist cotton ball or swab.

6. After application, remove the mixing tip or eco tip from the syringe. Clean the outside of the syringe, place the cap tightly on to syringe hub. Store in a cool and dry place.

Physical properties