Prosil | Solution For Use As A Chemical Bonding Agent For Adhesion

Description

Description :

Ethanolic solution of hydrolyzed 3-Methacryloxypropyltrimethoxysilane for use as a chemical joining agent in adhesion and cementation processes of ceramic parts, ceromer, laboratory resin and fiberglass pins.

- High adhesiveness
- Ease of use

Benefits :

- Efficiency 

Increases adhesion to different resinous substrates.

- Convenience 

Application protocol of only 01 minute.

- High bonding capability

Promotes an increase of up to 30% in adhesive capability.

Recommendations :

Salinization agent for ceramic pieces, laboratory resin and fiberglass posts.

Step by step :

Step 1 of 4 :

- Application into ceramic prosthesis, ceromers and lab composites

Pieces in ceramic and/or ceromers shall be previously etched with hydrofluoric acid Condac Porcelain (FGM), for the time instructed by the manufacturer, rinsed with abundant water until fully removing the product, and thoroughly dried.

Step 2 of 4 :

- Apply a thin Prosil layer on top of the internal surface of the prosthesis, aided by the disposable applicator Cavibrush (FGM), and wait for 1 minute. Dry the surface with light air jets.

Step 3 of 4 :

NOTE
After silanizing, the internal surface of the piece shall be bright, ready for final cementation.

Silanizing in fiber glass posts

Clean the post according to the manufacturer’s recommendations.

Step 4 of 4 :

- Apply a thin Prosil layer on the post’s surface with the help of a disposable applicator Cavibrush (FGM) and wait for 1 minute. Dry the surface with light air jets.